La gourmet 1800ml Seamless Kettle - Baby Blue
Seamless inner body, no hot water in contact with plastic, rapid boiling & cool to touch. Capacity: 1.8L
Power: 2200w
Material: Stainless Steel
Warranty: 1 year
INNOVATIVE FEATURES:
- Easy to clean seamless inner body design: No welding point or hard to reach corner that traps residue
- Double temperature control: accurate temperature control & double protection
- Special double wall design:
* safety cool to touch outer layer
* surface temperature reduction up to 50%
* up to 30% better heat retention
- One-touch spring lid: easy opening & closing
- Wide 90° lid opening: easy to clean and refill water
- Rapid boiling: Up to 30% faster
SAFETY FEATURES:
- Healthy boiling:
* No plastic parts in contact with boiling water
* Stainless steel strainer
* Stainless steel inner lid
- High quality material:
* SUS304 stainless steel
* Food grade stainless steel that is non-reactive
- Safety features: Boil dry protection (Automatically turns off when water boils)
BEFORE USE
If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe kettle outer surface with damp cloth.
NOTE: The max capacity of kettle is 1.8L.
USING
1. Place the kettle on flat surface.
2. To fill water into kettle, remove kettle from the power wire base and open the lid, fill with the desired amount of water, and then close the lid. The water level should not exceed MAX marks or lesser than 100ml. Too little water will cause the kettle switching off before the water boil.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly close before plugging the power outlet.
3. Place kettle on the power wire base.
4. Connect the plug into a power outlet. Press down “O” on I/O switch, the function light will light up. Then the kettle will start to boil water, once the water has being boiled the I/O switch will be off automatically. You can shut off the power by press down “I” on I/O switch at any moment while boiling water.
5. Lift the kettle from the power base and then pour the water.
NOTE: Pay attention when pouring hot water from kettle as boiling water may cause injury.
6. The heating element surface is subject to residual heat after use.
Registered Product's Safety Mark -220417-24
Power: 2200w
Material: Stainless Steel
Warranty: 1 year
INNOVATIVE FEATURES:
- Easy to clean seamless inner body design: No welding point or hard to reach corner that traps residue
- Double temperature control: accurate temperature control & double protection
- Special double wall design:
* safety cool to touch outer layer
* surface temperature reduction up to 50%
* up to 30% better heat retention
- One-touch spring lid: easy opening & closing
- Wide 90° lid opening: easy to clean and refill water
- Rapid boiling: Up to 30% faster
SAFETY FEATURES:
- Healthy boiling:
* No plastic parts in contact with boiling water
* Stainless steel strainer
* Stainless steel inner lid
- High quality material:
* SUS304 stainless steel
* Food grade stainless steel that is non-reactive
- Safety features: Boil dry protection (Automatically turns off when water boils)
BEFORE USE
If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe kettle outer surface with damp cloth.
NOTE: The max capacity of kettle is 1.8L.
USING
1. Place the kettle on flat surface.
2. To fill water into kettle, remove kettle from the power wire base and open the lid, fill with the desired amount of water, and then close the lid. The water level should not exceed MAX marks or lesser than 100ml. Too little water will cause the kettle switching off before the water boil.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly close before plugging the power outlet.
3. Place kettle on the power wire base.
4. Connect the plug into a power outlet. Press down “O” on I/O switch, the function light will light up. Then the kettle will start to boil water, once the water has being boiled the I/O switch will be off automatically. You can shut off the power by press down “I” on I/O switch at any moment while boiling water.
5. Lift the kettle from the power base and then pour the water.
NOTE: Pay attention when pouring hot water from kettle as boiling water may cause injury.
6. The heating element surface is subject to residual heat after use.
Registered Product's Safety Mark -220417-24
Seamless inner body, no hot water in contact with plastic, rapid boiling & cool to touch. Capacity: 1.8L
Power: 2200w
Material: Stainless Steel
Warranty: 1 year
INNOVATIVE FEATURES:
- Easy to clean seamless inner body design: No welding point or hard to reach corner that traps residue
- Double temperature control: accurate temperature control & double protection
- Special double wall design:
* safety cool to touch outer layer
* surface temperature reduction up to 50%
* up to 30% better heat retention
- One-touch spring lid: easy opening & closing
- Wide 90° lid opening: easy to clean and refill water
- Rapid boiling: Up to 30% faster
SAFETY FEATURES:
- Healthy boiling:
* No plastic parts in contact with boiling water
* Stainless steel strainer
* Stainless steel inner lid
- High quality material:
* SUS304 stainless steel
* Food grade stainless steel that is non-reactive
- Safety features: Boil dry protection (Automatically turns off when water boils)
BEFORE USE
If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe kettle outer surface with damp cloth.
NOTE: The max capacity of kettle is 1.8L.
USING
1. Place the kettle on flat surface.
2. To fill water into kettle, remove kettle from the power wire base and open the lid, fill with the desired amount of water, and then close the lid. The water level should not exceed MAX marks or lesser than 100ml. Too little water will cause the kettle switching off before the water boil.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly close before plugging the power outlet.
3. Place kettle on the power wire base.
4. Connect the plug into a power outlet. Press down “O” on I/O switch, the function light will light up. Then the kettle will start to boil water, once the water has being boiled the I/O switch will be off automatically. You can shut off the power by press down “I” on I/O switch at any moment while boiling water.
5. Lift the kettle from the power base and then pour the water.
NOTE: Pay attention when pouring hot water from kettle as boiling water may cause injury.
6. The heating element surface is subject to residual heat after use.
Registered Product's Safety Mark -220417-24
Power: 2200w
Material: Stainless Steel
Warranty: 1 year
INNOVATIVE FEATURES:
- Easy to clean seamless inner body design: No welding point or hard to reach corner that traps residue
- Double temperature control: accurate temperature control & double protection
- Special double wall design:
* safety cool to touch outer layer
* surface temperature reduction up to 50%
* up to 30% better heat retention
- One-touch spring lid: easy opening & closing
- Wide 90° lid opening: easy to clean and refill water
- Rapid boiling: Up to 30% faster
SAFETY FEATURES:
- Healthy boiling:
* No plastic parts in contact with boiling water
* Stainless steel strainer
* Stainless steel inner lid
- High quality material:
* SUS304 stainless steel
* Food grade stainless steel that is non-reactive
- Safety features: Boil dry protection (Automatically turns off when water boils)
BEFORE USE
If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe kettle outer surface with damp cloth.
NOTE: The max capacity of kettle is 1.8L.
USING
1. Place the kettle on flat surface.
2. To fill water into kettle, remove kettle from the power wire base and open the lid, fill with the desired amount of water, and then close the lid. The water level should not exceed MAX marks or lesser than 100ml. Too little water will cause the kettle switching off before the water boil.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly close before plugging the power outlet.
3. Place kettle on the power wire base.
4. Connect the plug into a power outlet. Press down “O” on I/O switch, the function light will light up. Then the kettle will start to boil water, once the water has being boiled the I/O switch will be off automatically. You can shut off the power by press down “I” on I/O switch at any moment while boiling water.
5. Lift the kettle from the power base and then pour the water.
NOTE: Pay attention when pouring hot water from kettle as boiling water may cause injury.
6. The heating element surface is subject to residual heat after use.
Registered Product's Safety Mark -220417-24
Complimentary delivery to an address on mainland Singapore with an online purchase of $150 & above nett.
If online purchase is below $150 nett, OG will provide delivery at an additional charge of $1.99.
Delivery will be made within 7 weekdays excluding Public Holidays. We regret we will not be able to accommodate specific delivery time slots.
For in-store services, click here.
New Arrivals
In Stock
$109.00
$59.00
In Stock
$159.00
$49.00
In Stock
$149.00
$65.00
In Stock
$89.90
$71.92
In Stock
$200.00
$99.90
In Stock
$299.00
$113.00
In Stock
$145.00
$89.00